Pallet Racking

Heavy Duty Pallet

Racking Systems

Heavy Duty Pallet Racking systems address all types of racking storage needs for industries such as manufacturing and retail distribution centres, retail logistics, government and institutional storage, 3PL and cross docking facilities, outdoor storage, grocery, food and freezer storage, cold storage, document storage facilities, tire storage and much more.

Our systems can handle large or small load capacities depending on your rack storage requirements and product / pallet loads.

Double Deep

Rack System

Double Deep Rack features back to back pallet storage two pallets deep. Ideal for increased storage density requirements where lift trucks have extended reach capability.

Double deep selective rack can be easily converted from single selective rack.

VNA Rack

Systems

VNA – Very narrow aisle rack by NAS consists of the same basic components as Selective Racking, but the access aisles are greatly reduced resulting in increased use of existing cubic space.

Loading and picking is mostly done by rail or wire guided swing reach and picker trucks. All picking locations can be accessed throughout the full height and length of the system.

Drive-In / Thru

Pallet Racking

Drive-In/Drive-Thru Pallet Racking Systems are designed for loading and retrieving full pallets from the same bay. Best suited for high volumes of the same SKU's per bay, providing dense storage.

Drive-In Systems are ideal for non-time/date sensitive products (FILO). Drive-Thru Systems are used when accessibility from both ends is required (FIFO) — ideal for time/date sensitive products.

Pushback Rack

Systems

Pallets are stored on rails that run the full length of the rack, generally spanning from two to twelve pallets. Pushback rack provides increased pallet counts while offering many more pick faces than traditional high-density systems. Each lane flows independently accommodating multiple products per bay.

Operates on the Last-In, First-Out (LIFO) principle per lane via a gravity-fed cart system — allowing retrieval of all pallets from the aisle.

Ideal for two to six pallet depths. Adaptable to prevent building columns from interfering with the packing aisles.

Pick Module

Systems

Pick Modules integrate both Pallet Flow and Push Back storage systems. Palletized loads feed conveyors for full box or Carton Flow picking. Pickers are continuously supplied with product while lift trucks always have openings available — each working in separate aisles without interference for maximum efficiency.

Upper levels accept full pallets. Systems start small, expand later. Easily disassembled and relocated with minimal disruption to production.

Cantilever

Racking Systems

Cantilever racking is designed to handle a wide variety of products providing unrestricted front access for long and irregular shaped products. Products rest on flat or tapered arms for easy loading. The columns act as backstops and flue space for sprinklers and water penetration.

Cantilever racking is an ideal structure to support a roof, protecting the products from the elements. Steel siding can be added to the sides and backs for added protection and rigidity.